Pictured above: The Testicle Tubular applied in its designed manner in circuit with a Corona Stimulator.
One of the first Electrodes released in our line of Tubular Electrodes, the PES Testicle Tubular is constructed out of our famous Electro-Flex™. This is the same conductive silicone elastomer we use to make our Electro-Flex Penile Rings and Anal Plugs, but in a tubular form.
Incorporating two of the three basic principles of Erotic Electro Stimulation; a proper delivery source and focusing of the electro stimulation; the Testicle Tubular by Paradise Electro Stimulations is a neccessary component in any man's electro sex experience!!
Please Note:If you do not already have aP.E.S. Power Box(which comes with two pairs of Low Profile Leads), you will need at least one pair ofLow Profile Leads(one pair connects two single pole Electrodes or one double pole Electrode).
The Low Profile Leads are needed if you are going to use this product with a different power source than the P.E.S. Power Box.
The Testicle Tubular Electrode is specifically designed to conform to the soft tissue mass of the scrotum sack, while at the same time encapsulating each testicle separately. The unique design snugly encompasses the scrotum sack, lifting and separating each testicle.
Pictured Above: Showing how to take off the low profile connection in order to trim the Testicle Tubular Electrode.
The pressure that you apply while adjusting this Electrode actually gives precise focusing of the Erotic Electro Stimulation to your most sensitive areas while maximizing the erotic sensation.
This is a single pole Electrode which must be used in conjunction with another P.E.S. Electrode to complete the circuit.
It is a great Electrode to use in 3-Electrode Configurations!
This Electrode is not only adjustable due to its construction but it can also be trimmed to give an even more personalized anatomic fit.
Pictured Above: Using the Testicle Tubular as a combination base ring and ball stretcher for an alternate application in circuit with a Corona Stimulator.
Like all P.E.S. Electrodes, the P.E.S. Testicle Tubular requires the P.E.S. Power Box in order to function, and is open to extensive experimentation with regards to how you wish to configure it. P.E.S. Low Profile Leads are sold separately for those who already have a power source.
Please note that the single pole Testicle Tubular requires a second Electrode in order to function.
US Patent #US RE41,463E
Customize Your Orgasm!
One of our line of Tubular Electrodes, the P.E.S. Testicle Tubular is designed to deliver Erotic Electro Stimulation to a specific erogenous zone. Constructed out of our conductive silicone elastomer, Electro-Flex™, this Electrode is designed to conform to the soft tissue mass of the scrotal sack while at the same time encapsulating each testicle separately. The pressure applied by the Testicle Tubular when adjusted properly gives precision focusing of the Erotic Electro Stimulation (EES) to your most sensitive areas, maximizing its effects.
This Electrode is not only adjustable due to its construction but it can also be trimmed to give an even more personalized anatomic fit.
The Testicle Tubular is a single pole Electrode and as such cannot be used alone. It requires a second Electrode in circuit with it in order to function properly. Keep in mind that some configurations may only work with the P.E.S. Power Box.
Due to their design, the Testicle Tubular should only be used with our Low Profile Lead technology. Use with other leads may cause damage to the Electrodes or they may not function properly.
As this is a tubular Electrode, the entire surface is conductive. It is recommended to wear latex gloves to help prevent accidental above-the-waist contact. This is only necessary when the power source is turned on.
This is an adjustable Electrode. It can be trimmed to provide a better fit. In order to trim this Electrode, remove the low profile connection with a pair of pliers, then remove the bulb, cut off the excess conductive tubing. Replace the bulb then insert the low profile connection. Make sure to leave enough tubing to properly apply the Electrode. DO NOT trim unless you have first assured that it is necessary.
It is recommended to shave the scrotum in order to ensure proper contact and reduce the possibility of hot spots.
Lubrication:
PES recommends the use of a lubricant with all PES Electrodes. Lubricant not only lubricates but also decreases the possibility of hot spots. We recommend PES ElectroLube (Item #PES075). You can also use Olive Oil. Water-based lubricants, such as Medi-Pak Perfomance Sterile Jelly, can be used in the event that you do not have either ElectroLube or Olive Oil. Make sure the lubricant you are using is a water-based lubricant with no silicone ingredients. Never use petroleum jelly or mineral oil as lubricant as these can damage the electrodes.
Caution: Do not use lubricants with silicone ingredients. Silicone is an insulator which greatly affects conductivity, and can chemically bond to the products made from Electro-Flex™ when applied over a long period of time. This will cause the apparatus to cease to function properly, and may void the warranty on the Electro-Flex™ line.
Cleaning:
This Electrode can be washed with soap and water (a 10% bleach, 90% water solution with a mild liquid soap also works), but do not soak or scrub. Make sure to wash off all fluids and rinse the Electrode thoroughly. Allow it to dry completely. For disinfection; if you plan to use the electrode for shared usage; we recommend the use of Swiss Navy Toy & Body Cleanser. Swiss Navy is safe for use on the skin as well as the electrode. It is anti-viral, anti-fungal, & anti-bacterial. Allow to dry completely before use.
