Pictured Above: Connecting the Low Profile Leads to the Vaginal Shield. Image from Alterpic.com.
One of the original Electrodes from Paradise Electro Stimulations, the P.E.S. Vaginal Shield is a concave acrylic plate with two silver conductive strips designed to deliver Erotic Electro Stimulation (EES) to the clitoris and labia, both inner and outer.
Latex straps are provided to hold the shield closely against the Venus mound, ensuring good contact with those very sensitive areas.
The sensations offered by the shield can be quite unusual. As the conductive surfaces deliver the E.E.S., a "pulling" or "sucking" sensation occurs in and around the clitoral and labial area. This can create intense arousal, especially when the PES Power Box is adjusted to peak performance.
This item is not for the beginner to electro-play. It takes experience to get this item configured properly for a pleasurable experience.
Please Note:If you do not already have aP.E.S. Power Box(which comes with two pairs of Low Profile Leads), you will need at least one pair ofLow Profile Leads(one pair connects two single pole Electrodes or one double pole Electrode).
The Low Profile Leads are needed if you are going to use this product with a different power source than the P.E.S. Power Box.
Pictured Above: Lubricate the Vaginal Shield well before use. Image from Alterpic.com
The V-Shield is a great Electrode for couples; since you and your partner can turn the application of the Vaginal Shield into an erotic journey and at the same time ensure that the Electrode has good contact with the target area.
To ensure it works effectively, it is strongly recommended to shave the labial region to help increase the contact between the skin and the Electrode as pubic hair acts like an insulator.
While the Vaginal Shield is a double pole Electrode and so does not require a second Electrode in order to function, it can be paired with the P.E.S. Rectal Pacifier or P.E.S. Anal Tubular for two or three Electrode configurations to add some anal stimulation to the mix.
Pictured Above: Anna Rose enjoying the estim delivered to her labial region with the Vaginal Shield. Image from Alterpic.com
Like all P.E.S. Electrodes, the PES Vaginal Shield requires the P.E.S. Power Box in order to function, and is open to extensive experimentation with regards to how you wish to configure it. P.E.S. Low Profile Leads sold separately if you already have a power source.
Customize Your Orgasm!
The P.E.S. Vaginal Shield is a concave acrylic plate with two silver conductive strips designed to stimulate the clitoris and labia, both inner and outer. Latex straps are provided to hold the shield closely against the Venus mound, ensuring good contact with those very sensitive areas.
The Vaginal Shield is a double pole Electrode and as such can be used alone. It can also be used as part of a 3-Electrode Configuration. Please note that this kind of configuration may only work with the P.E.S. Power Box.
Due to its design, the Vaginal Shield should only be used with our Low Profile Lead technology. Use with other leads may cause damage to the Electrode or it may not function properly.
Please note that when using the Vaginal Shield it is strongly recommended to shave the genital area to ensure better contact.
Lubrication:
PES recommends the use of a lubricant with all PES Electrodes. Lubricant not only lubricates but also decreases the possibility of hot spots. We recommend PES ElectroLube (Item #PES075). You can also use Olive Oil. Water-based lubricants, such as Medi-Pak Perfomance Sterile Jelly, can be used in the event that you do not have either ElectroLube or Olive Oil. Make sure the lubricant you are using is a water-based lubricant with no silicone ingredients. Never use petroleum jelly or mineral oil as lubricant as these can damage the electrodes.
Caution: Do not use lubricants with silicone ingredients. Silicone is an insulator which greatly affects conductivity, and can chemically bond to the products made from Electro-Flex™ when applied over a long period of time. This will cause the apparatus to cease to function properly, and may void the warranty on the Electro-Flex™ line.
Cleaning:
This Electrode can be washed with soap and water (a 10% bleach, 90% water solution with a mild liquid soap also works), but do not soak or scrub. Make sure to wash off all fluids and rinse the Electrode thoroughly. Allow it to dry completely. For disinfection; if you plan to use the electrode for shared usage; we recommend the use of Swiss Navy Toy & Body Cleanser. Swiss Navy is safe for use on the skin as well as the electrode. It is anti-viral, anti-fungal, & anti-bacterial. Allow to dry completely before use.
