Pictured Above: Vaginal Plug in use without the straps.
THE Original Female Electrode from Paradise Electro Stimulations, the P.E.S. Vaginal Plug is the ideal Electrode for a woman just starting to use Erotic Electro Stimulation (EES).
Originally a three pole Electrode, the Vaginal Plug was redesigned into a double pole Electrode using two silver conductive surfaces on opposing sides of the rounded acrylic rod to deliver the maximum stimulation in a more effective and pleasurable manner.
The acrylic rod is set into a base plate that has a rounded opening that we call the Clitoral Access Port that allows easy access to the clitoris for manual, oral, or vibratory stimulation.
Please Note: If you do not already have aP.E.S. Power Box(which comes with two pairs of Low Profile Leads), you will need at least one pair ofLow Profile Leads(one pair connects two single pole Electrodes or one double pole Electrode).
The Low Profile Leads are needed if you are going to use this product with a different power source than the P.E.S. Power Box.
Pictured Above: Tying the included straps into place to secure the Vaginal Plug. Image from Alterpic.com
The V-Plug is supplied with latex straps to allow for tension as well as maneuverability. It measures 5 3/4" (5.75") in length and is 1 1/4" (1.25") in diameter. Made from clear acrylic, the Plug is a very clean Electrode with a highly optical appeal.
Intended to deliver the EES internally, it bears some resemblance to a more traditional dildo or vibrator visually. In function, its design makes exploring and experiencing the pleasures of Electro Sex easier.
This Electrode is considered a penetrative method for the delivery of the Electro Stimulation. This means that it delivers stimulation in a manner that mimics or simulates actual penetration without the friction and numbness one might experience with actual sex or an ordinary vibrator/dildo. There may also be some peripheral stimulation internally behind the clitoris, intensifying the pleasures available.
Pictured Above: Using a vibrator on the clitoris with the estim from the Vaginal Plug. Image from Alterpic.com.
Like all P.E.S. Electrodes, the PES Vaginal Plug requires the P.E.S. Power Box in order to function, and is open to extensive experimentation with regards to how you wish to configure it. P.E.S. Low Profile Leads sold separately if you already have a power source.
Customize Your Orgasm!
Originally a three pole Electrode, the P.E.S. Vaginal Plug was redesigned to use two silver conductive surfaces on opposing sides of the rounded acrylic rod to deliver the maximum stimulation in a more effective and pleasurable manner. The acrylic rod is set into a base platform that has a rounded opening, the Clitoral Access Port, that allows easy access to the clitoris for manual, oral, or vibratory stimulation. The Plug is supplied with latex straps to allow for tension as well as maneuverability. It measures 5 3/4" (5.75") in length and is 1 1/4" (1.25") in diameter. Made from clear acrylic, the Plug is a very clean Electrode with a highly optical appeal.
The Vaginal Plug is a double pole Electrode and as such can be used alone. It can also be used as part of a 3-Electrode Configuration. Please note that this kind of configuration may only work with the P.E.S. Power Box.
Due to its design, the Vaginal Plug should only be used with our Low Profile Lead technology. Use with other leads may cause damage to the Electrode or it may not function properly.
Lubrication:
PES recommends the use of a lubricant with all PES Electrodes. Lubricant not only lubricates but also decreases the possibility of hot spots. We recommend PES ElectroLube (Item #PES075). You can also use Olive Oil. Water-based lubricants, such as Medi-Pak Perfomance Sterile Jelly, can be used in the event that you do not have either ElectroLube or Olive Oil. Make sure the lubricant you are using is a water-based lubricant with no silicone ingredients. Never use petroleum jelly or mineral oil as lubricant as these can damage the electrodes.
Caution: Do not use lubricants with silicone ingredients. Silicone is an insulator which greatly affects conductivity, and can chemically bond to the products made from Electro-Flex™ when applied over a long period of time. This will cause the apparatus to cease to function properly, and may void the warranty on the Electro-Flex™ line.
Cleaning:
This Electrode can be washed with soap and water (a 10% bleach, 90% water solution with a mild liquid soap also works), but do not soak or scrub. Make sure to wash off all fluids and rinse the Electrode thoroughly. Allow it to dry completely. For disinfection; if you plan to use the electrode for shared usage; we recommend the use of Swiss Navy Toy & Body Cleanser. Swiss Navy is safe for use on the skin as well as the electrode. It is anti-viral, anti-fungal, & anti-bacterial. Allow to dry completely before use.
